Hasselblad X1D-50c User Manual page 111

Settings
An active and pending Bracketing
function, is indicated both on the Control
Screen and in Live View.
In the example to the right, the
Bracketing sequence will use 3 images.
To start the sequence, simply press the
shutter release and all captures will be
made automatically.
During the Bracketing sequence, the rear
screen and EVF will show an information
overlay, as shown to the right.
1 Bracketing Icon
2 Current capture
3 Number of captures in the sequence
4 Current expoure adjustment
5 For Shutter Speeds longer than 1
second, this indicates the remaining
time for the current capture.
To exit from the sequence before it has
been completed, press the Cross Button.
After a capture, the last image will show
up on the rear screen.
Note!
Bracketing is not supported in Phocus
Mobile or when tethered to Phocus. For
tethered operation, use the Capture
Sequencer function in Phocus.
Note!
Light measurement, focusing and Auto
White Balance is performed before first
exposure and is applied to all images in
the sequence.
X1D
Control Screen
400
ISO
4 60
f/
12.5 3 0.0
EV
143
1 2 3
BRACKETING
2 3
+0.5 EV
4
BRACKETING
2 3
0.5 EV
Exposing: 3
5
Table of Content
USER GUIDE
Live View
1
2
Exit
Exit
111
www.hasselblad.com