Biostar 945G Micro 775 TE Setup Manual page 66

945G Micro 775 TE / 945GC Micro 775
Report NO FDD for Win95
The Choices: NO (default), YES.
Virus Warning
This option allows you to choose the Virus Warning feature that is used to protect
the IDE Hard Disk boot sector. If this function is enabled and an attempt is made to
write to the boot sector, BIOS will display a warning message on the screen and sound an
alarm beep.
Disabled (default)
Enabled
Hyper-Threading Technology
This option allows you to enable or disable CP U Hyper-Threading. " Enabled"
for Windows XP and Linux 2.4.x (OS optimized for Hyper-Threading Technology.)
" Disabled" for other OS (OS not optimized for Hyper-Threading Technology.)
The Choices: Enabled (default), Disabled.
Quick Power On Self Test
Enabling this option will cause an abridged version of the Power On
Self-Test (P OST) to execute after you power up the computer.
Disabled
Enabled (default)
Boot Up NumLock Status
Selects the NumLock State after power on.
On (default)
Off
Gate A20 Option
Select if chipset or keyboard controller should control Gate A20.
Normal
Fast (default)
Typematic Rate Setting
When a key is held down, the keystroke will repeat at a rate determined by
the keyboard controller. When enabled, the typematic rate and typematic
delay can be configured.
The Choices: Disabled (default), Enabled.
Typematic Rate (Chars/Sec)
Sets the rate at which a keystroke is repeated when you hold the keydown.
The Choices: 6 (default), 8,10,12,15,20,24,30
Virus protection is disabled.
Virus protection is activated.
Normal POST.
Enable quick P OST.
Numpad is arrow keys.
Numpad is number keys.
A pin in the keyboard controller controls GateA20.
Lets chipset control Gate A20.
12