Biostar 945G Micro 775 TE Setup Manual page 63

945G Micro 775 TE / 945GC Micro 775
Thermal Management
This option allows you to choose the thermal management method of your monitor.
The Choices: Thermal Monitor 1 (default), Thermal Monitor2.
Notes: The choices will be diff erent according to your CPU f eatures.
TM2 B us Ratio
This option represents the frequency. (Bus ratio of the throttled performance state
that will be initiated when the on-die sensor goes from not hot to hot.)
Min= 0 Max= 255 Key in a DEC number.
The Choices: 0X (default).
TM2 Bus VID
This option represents the voltage of the throttled performance state that will be
initiated when the on-die sensor goes from not hot to hot.
The Choices: 0.8375V (default), 0.8375V-1.6000V.
Limit CPUID MaxVal
Set limit CP UID MaxVal to 3, it should be " Disabled" for Win XP .
The Choices: Disabled (default), Enabled.
C1E Function
This item allows you to choose the C1E function.
The Choices: Auto (default), Disabled.
Execute Disable Bit
When disabled, forces the XD feature flag to always return 0.
The Choices: Enabled (default), Disabled.
Virtualization Technology
When enabled, a VMM can utilize the additional hardware capabilities provided by
Vanderpool Technology.
The Choices: Enabled (default), Disabled
9