Biostar PT890 775 Setup Manual page 85

IRQ Resources
This submenu will allow you to assign each system interrupt a type, depending
on the type of device using the interrupt. When you press the "Press Enter" tag,
you will be directed to a submenu that will allow you to configure the system
interrupts. This is only configurable when "Resources Controlled By" is set to
"Manual".
IRQ-3
IRQ-4
IRQ-5
IRQ-7
IRQ-9
IRQ-10
IRQ-11
IRQ-12
IRQ-14
IRQ-15
PCI / VGA Palette Snoop
Some old graphic controllers need to "snoop" on the VGA palette and then map
it to their display as a way to provide boot information and VGA compatibility.
This item allows such snooping to take place.
The Choices: Disabled (default), Enabled
Assign IRQ For VGA
This item allows the users to choose which IRQ to assign for the VGA.
The Choices: Enabled (default), Disabled.
Assign IRQ For USB
This item allows the users to choose which IRQ to assign for the USB.
The Choices: Enabled (default), Disabled.
Maximum Payload Size
Set the maximum payload size for Transaction packets (TLP).
The Choice: 4096 (default.), 128, 256, 512, 1024, 2048.
PT890 775
assigned to PCI Device
assigned to PCI Device
assigned to PCI Device
assigned to PCI Device
assigned to PCI Device
assigned to PCI Device
assigned to PCI Device
assigned to PCI Device
assigned to PCI Device
assigned to PCI Device
35