Sensor Cooking; Sensor Reheat - Kucht KM30C Operation Manual

4. You can change the temperature by using the number
keys. Touch
Start/Enter
The appliance starts preheating.
The set temperature is reached once the preheat bar has
filled up completely and a beep sounds.
Opening appliance door during operation
Opening the appliance door during operation will
interrupt the current mode. When you close the
appliance door, operation will be resumed.
Setting Pizza mode for microwave pizza
Place the microwave pizza on the ceramic tray and put it
in the oven following package directions.
Touch Pizza.
1.
Touch the number key 3 or touch Pizza
2.
repeatedly until MICROWAVE PIZZA is displayed.
Touch Start/Enter .
3.
Touch Start/Enter again. sensing and the microwave
4.
symbol light up on the display.
The appliance starts sensing.

Sensor cooking

You can select two sensor cooking modes. Sensor
cooking allows you to cook many of your favorite foods
without selecting cooking times and power levels. The
microwave oven automatically determines the required
cooking time for each food item.
For best results for cooking by sensor, follow these
recommendations:
Food cooked with the sensor system should start from
normal storage temperature.
Turntable tray, ceramic tray and outside of container
should be dry.
Foods should always be covered loosely with
microwavable plastic wrap, wax paper or lid.
Do not open the door or touch
sensing time. When sensing time is over, the oven
beeps once and the remaining cooking time will
appear in the display. At this time you can open the
door to stir, turn or rearrange the food
to confirm.
Clear/Off key during
.
When sensing is complete, a beep will sound and the
calculated cook time will start to count down.
After the cook time has run out a beep will sound. The
appliance turns off and the clock is displayed.
Note: Do not open the door during the sensing
process, or the program will be cancelled
Once the calculated cook time is displayed, you can
open the door to stir, turn or rearrange the food. Touch
Start/Enter to resume operation.
Opening appliance door during operation
Opening the appliance door during operation will
interrupt the current mode. Close the appliance door and
then touch Start/Enter to resume operation.

Sensor Reheat

The Sensor Reheat feature lets you reheat dinner plates
or casseroles (8-16 oz.) for your cooking convenience.
Setting Sensor Reheat
Touch Sensor Reheat .
1.
Touch Start/Enter .
2.
sensing is displayed. The microwave operates during
sensing.
When sensing is complete, a beep will sound and the
3.
calculated cook time will start to count down.
Note: Do not open the door during the sensing
process, or the program will be cancelled
Once the calculated cook time is displayed, you can
open the door to stir, turn or rearrange the food. Touch
Start/Enter to resume operation.
When sensor reheat is finished, a beep will sound and
the appliance turns off.
Notes
Cover with vented plastic wrap or wax paper.
Reheat food on a microwaveable dinner plate.
16
.
.