NEC Express5800/R120i-1M Installation Manual page 100

Hide thumbs Also See for Express5800/R120i-1M:
Table of Contents

Advertisement

Chapter 3 Appendix
Source
ID
Timing when an event is logged
Windows Server 2016
Service Control Manager
7023
When running an OS for the first time or
rebooting it, or while the system is in use
Service Control
Manager
7024
When starting system, or applying Standard
Program Package
Service Control Manager
7030
When running an OS for the first time
Microsoft-Windows-
DistributedCOM
10010
When running an OS for the first time or
rebooting it
Microsoft-Windows-NDIS
10317
When removing a team
100
Level
"System Log"
Error
Error
Error
Error
Error
Installation Guide (Windows Server 2016)
Message (Description)
Action
The Data Sharing Service service terminated with the following
error: %%3239247874
* The message may not be displayed correctly as follows, but there
is no problem.
The description for Event ID 7023 from source Service Control
Manager cannot be found. Either the component that raises this
event is not installed on your local computer or the installation is
corrupted. You can install or repair the component on the local
computer.
If the event originated on another computer, the display information
had to be saved with the event.
The following information was included with the event:
Data Sharing Service
%%3239247874
The locale specific resource for the desired message is not present.
This event does not affect system operation.
The Intel® Ethernet Thermal Sensor Monitor Service service
terminated with the following service-specific error:
The operation completed successfully."
This event does not affect system operation.
The Printer Extensions and Notifications service is marked as an
interactive service. However, the system is configured to not allow
interactive services. This service may not function properly.
This event does not affect system operation if it is recorded only on
the first startup and not recorded repeatedly.
The server {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} did
not register with DCOM within the required timeout.
Refer to the following website.
https://support.microsoft.com/ja-jp/help/956479
Miniport Microsoft Network Adapter Multiplexor Driver,
{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx},
Interface deleted while PNP Device still exists. Note that this event is
provided for informational purpose and might not be an error always
(Eg: In case of vSwitch which was recently un-installed or a LBFO
team was removed)
This event does not affect system operation.
List of Windows Event Log
(Japanese)
had
event
Network

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express5800 seriesExpress5800/r120i-2mExpress5800/r120h-1mExpress5800/r120h-1m 2nd-genExpress5800/r120h-1m 3rd-genExpress5800/r120h-2m ... Show all

Table of Contents