Norwood LumberMate Pro MX34 Original Instructions Manual page 9

Remove two 3/8" x 3/4" carriage bolts
from the underside of the bed rail and
reinstall them to secure the underside of
the leveling stand to the bed. Repeat this
procedure for both sides of the sawmill.
For the "in between" stands, remove a
3/8" x 1" bolt (6) and a 3/8" flanged nut (5)
from the cross bunk corner bracket.
Reinstall the bolt and nut to secure the
leveling stand.
6
This photo shows the relationship of the
leveling stands installed at either end
of the bed and the leveling stands in
between the end stands.
EN–5