Norwood LumberMate Pro MX34 Original Instructions Manual page 8

Install a left leveling stand (1) and a right
leveling stand (2) to each corner of the
bed.
Note: The 3/8" bolts and nuts (5,6) used
to secure the leveling legs located at
each end of the track are scattered in
every box # LM34-41170-14.
2
1
Secure each corner leveling stand with
a 3/8" x 3/4" flanged bolt (6) and a 3/8"
flanged nut (5) on the ends of the bed.
Secure the underside of the leveling
stand with a 3/8" x 3/4" flanged bolt (6)
and a 3/8" flanged nut. (5)
Repeat this procedure at all four corners.
6
For the "in between" stands, install the
leveling stands (1,2) at each cross bunk.
A left will go on one side of the bed. A
right will go on the opposite side.
EN–4