Advertisement
Available languages
Available languages
EN
Leveling Stands
Safety Instructions
The sawmill, its options, accessories,
engine and blades (the "equipment")
are extremely dangerous and can
cause severe injury or death. To avoid
serious injury, the equipment must always be
handled, operated and stored with the utmost
care and good judgment and in accordance
with all warnings, cautions, instructions and
procedures contained in this manual, in the
engine manual, in the instructions enclosed
with optional accessories and on the decals
posted on the equipment. Failure to use good
judgment or to follow any of these warnings,
cautions, instructions and procedures can
result in severe injury or death.
WARNING! This symbol means "Pay Extra
Attention" and is always followed by a warning
about a danger that can cause severe injury.
This symbol means "Pay Attention" and is
always followed by a caution or warning of
great importance for safety or sawing results.
For your own safety and the safety of others,
do not begin working with this equipment
before having read and understood this entire
manual, the engine manual, the instructions
enclosed with optional accessories and the decals
posted on the equipment.
Save all instructions for future reference. Keep all decals
in place, clean and readable. Replace any damaged or
missing decals without delay.
D I S C L A I M E R
Norwood Industries Inc. and Norwood Sawmills
U.S.A. Inc. disclaim any responsibility or
liability, in negligence or otherwise, for any
injuries, damages or losses of any kind arising
during the course of assembling, operating or
handling this equipment, options, accessories
or blades howsoever caused.
Responsibility for final inspection of the
sawmill parts and components, and the
assembly, maintenance and safe use of the
equipment, lies solely with the person(s) who
assembles and operates the equipment and
handles blades.
Persons under the age of 18 may not work with the
equipment or handle blades.
Only persons who meet all of the following
requirements are qualified to operate the equipment
or handle blades.
Qualified operators:
a. Have read and fully understood all the warnings,
cautions, instructions and procedures in this manual,
the engine manual and all instructions enclosed with
optional accessories, and on all decals posted on
the equipment,
b. Are well rested,
c. Are in good physical health with good eyesight,
d. Have not consumed alcohol or drugs, and
EN–1
EN–1
Advertisement
