"E
P
. M
230 V"
SPRESSO
OINT MOD
ATINÈE
Pump maintenance
First carry out the operations described in schedule 3.B
"Rear part preliminary maintenance operations"
Loosen the pump support braces by unscrewing the
two screws shown in the figure.
Note:
Before proceeding to the pump substitution or
maintenance it is firstly necessary to disassemble
the softener as previously described.
Disconnect the two pump feed cables (A) and (B)
and the ground one (C).
By using a 10 mm wrench, unscrew the pipe
tightening nut that connects the pump to the
solenoid valve.
Extract the pipe from the solenoid-valve.
3.6
1/2
C
. 83192 / R
. 2.00 / J
2003
OD
EL
ANUARY