Table of Contents
Advertisement
5.2
Functions specifications
TES7008 functions specifications
Functions
Switching function
VLAN
RSTP
IGMP
QoS and ACL
Storm suppression
Flow control
Specifications
The overall switching capacity is 46 Gbit/s, the service slot bandwidth is two-way
20 Gbit/s, and the uplink bandwidth is two-way 22 Gbit/s;
32 K MAC address table; support 2 K multicast tables; support 4 K VLANs
(802.1Q);
Aggregation of up to 2 * 10 GE (optional) and 2 uplink GE ports (IEEE 502.ad).
Support a maximum of 2 aggregation groups; support port-based mirroring
Support IEEE 802.1Q standard VLAN; support 4000 concurrent VLANs;
Powerful VLAN extension function, support VLAN Stacking/Trunk/Translation,
flexible QinQ and so on
Support RSTP
Support IGMPv1, V2 protocol; support IGMP snooping/proxy; support
controllable multicast
Support Committed Access Rate (CAR) function, the granularity of traffic rate limit
is: 128 Kbps.
Support re-marking according to port ID, MAC address, VLAN, 802.1p priority
mark, IP TOS priority.
Support flexible queue scheduling algorithms, based on ports and queues at the
same time; support three queue scheduling strategies of Strict Priority (SP),
Weighted Round Robin (WRR) and mixed mode (SP+WRR).
Provide illegal frame filtering and packet filtering functions based on source MAC
(Medium Access Control) address, source IP address, destination IP address, port,
and so on.
Support QoS Profile management mode, enabling users to formulate QoS service
plans.
Support broadcast, multicast and DLF broadcast storm suppression, and
suppression based on the set number of packets per second (pps).
Support IEEE 802.3x flow control in full duplex mode; support backpressure flow
control in half duplex mode
23
Document version: V1.0
Advertisement
Table of Contents
