Table of Contents
Advertisement
SETTINGS (cont'd)
HBBTV
Toggle the HBBTV function on/off. If switched off, catch-up features will not be
available.
Country
Set the current country. By default this is set as Australia.
HDMI CEC
The HDMI CEC (Consumer Electronics Control) system can be used only with
devices that have the HDMI CEC feature. You must connect an HDMI CEC
device using an HDMI cable. Some HDMI cables may not support HDMI CEC
functions.
• HDMI CEC: On/Off
• Auto standby: When enabled, turning off the TV will also turn off the
connected device.
• ARC: Turn Audio Return Channel function on/off.
• Auto power on: When enabled, turning on the TV will also turn on the
connected device.
PVR file system
Adjust settings for PVR (personal video recorder). USB storage device is
required. See page 15 for more information.
Bluetooth
Toggle bluetooth on/off.
Restore factory default
Reset all system settings to the factory default. When the restore is complete,
the TV will enter standby mode. When turned on, the Setup Wizard will begin.
LOCK
The default password is 0-0-0-0
Lock system
The feature can prevent unauthorized operating the TV set, unless entering
4-digit password.
NOTE:
If you forget your password, use the factory password 1-2-2-5. You can then gain access to
change your password if necessary.
Setting
Channel
Picture
Sound
Network
System
Lock
Timer
Support
Set password
Press the number buttons on your remote control to set a custom password.
When the new password has been input twice, the setting is finished
successfully. The TV will return to the previous menu.
Block program (in DTV mode)
Select which program will be blocked, then press
Yellow button again to unblock. This function is only
to block. Press the
available when Lock System set to 'on'.
Parental guidance (in DTV mode)
This feature can prevent children watching adult TV program, according to the
rating limit set.
TIMER
Auto sync
When 'on', the TV will automatically sync the local
clock according to the DTV broadcasting time.
Time zone
Set time zone.
Clock
Display either the DTV broadcasting time, or set the
time manually. (This function cannot be adjusted if
'auto sync' is on.)
Sleep timer
Switches the TV to standby mode after a defined period of time. Intervals:
10min, 20min, 30min, 60min, 90min, 120min, 180min, 240min. To cancel the
sleep timer, set to 'Off'.
Please enter password!
Clear
Cancel
Yellow colour button
Timer
Auto Sync
Time Zone
Clock
Sleep Timer
Auto Sleep
No Signal Power Off
On
New South Wales
GMT+10
14:03
Off
Off
On
13
Advertisement
Table of Contents
