16. Remove the 5/16" Nut (34) and the 5/16" x 2 1/4"
Bolt (106) from the bracket on the Latch Crossbar
(114).
Align the upper end of the Storage Latch (52)
with the bracket on the Latch Crossbar (114),
and insert the 5/16" x 2 1/4" Bolt (106) through
the bracket and the Storage Latch. This will
push a spacer (M) out of the Storage Latch;
discard the spacer.
Next, tighten the 5/16" Nut (34) onto the 5/16" x
2 1/4" Bolt (106). Do not overtighten the Nut;
the Storage Latch (52) must be able to pivot.
Then, lower the Frame (56) (see HOW TO
LOWER THE TREADMILL FOR USE on page
25).
17. Firmly tighten the four 3/8" x 2 3/8" Screws
(7), the two 3/8" x 1 3/4" Screws (62), and the
two 3/8" x 1 1/4" Screws (63).
Next, set the Left Inner Base Cover (100) onto
the lower end of the Left Upright (89). Then, slide
the Left Base Cover (82) downward and press it
onto the Left Inner Base Cover.
Next, set the Right Inner Base Cover (101) onto
the lower end of the Right Upright (90). Then,
slide the Right Base Cover (83) downward and
press it onto the Right Inner Base Cover.
16
34 M
114
56
17
83
62
63
7
90
15
106
52
89
82
100
63
7
62
101