Inserting/Changing The Filter; Cleaning The Machine - Jura GIGA W10 Instructions For Use Manual

7 Maintenance

Inserting/changing the filter

Cleaning the machine

CAUTION
26
Once the filter cartridge stops working (depending on the water
hardness setting), the GIGA will prompt you to change the filter�
E Your GIGA no longer has to be descaled if you are using the
CLARIS Pro Smart
E CLARIS Pro Smart
specialised dealers�
Precondition: The start screen is displayed� (Alternatively,
the filter' is displayed in the Cockpit if the filter's capacity has been
exhausted�)
Remove and empty the water tank�
T
Open the filter holder and remove the old CLARIS Pro Smart
T
filter cartridge along with the extension�
Fit the filter cartridge extension on top of a new CLARIS Pro
T
Smart filter cartridge�
+
Insert the filter cartridge with its extension into the water tank�
T
Close the filter holder� It will click into place audibly�
T
Fill the water tank with fresh, cold water and reinsert the tank�
T
The machine automatically detects that you have just inserted/
changed the filter cartridge�
'Filter is being rinsed', water flows directly into the drip tray�
'Empty drip tray' /
Empty the drip tray and coffee grounds container and put them
T
back into the machine�
'Filter operation'
The start screen is displayed�
After 180 preparations or 80 switch-on rinses, the GIGA will prompt
you to clean it�
If the wrong cleaning agent is used, the machine could be
damaged and/or traces could be left behind in the water�
Use only original JURA maintenance products�
T
E The cleaning programme lasts approximately 20 minutes�
E Do not interrupt the cleaning programme� The quality of
cleaning will be impaired if you do so�
E JURA cleaning tablets are available from specialised dealers�
Precondition: 'Clean'
Fill the water tank
T
Touch 'Clean'�
T
filter cartridge�
+
filter cartridges are available from
+
'Empty coffee grounds container'
is displayed in the Cockpit�
'Change
+