Product Care Information - acaia AOT004 User Manual

Product Care Information

Care and Cleaning
Do not immerse the Orbit in water. Use a soft cloth with warm water only to clean the
product. Do not use detergent or other chemicals for cleaning as this can damage the
product.
To maintain a low retention for the Orbit, we recommend cleaning the spout regularly in
the steps below:
Do not perform burr cleaning or burr replacement without proper knowledge or
technique. Acaia is not responsible for realignment or reassembly of the grinder once it
is disassembled.
1. Remove the spout extender and use the knocker multiple
times.
2. Using a small cross slot screwdriver, remove the two screws
from the Orbit spout on the burr housing.
3. Remove the spout. Clean the Orbit spout with a brush and
activate purge by triple clicking the Orbit button.
4. Reassemble the Orbit spout with the burr housing and fasten
with two screws. These screws can be replaced with thumb
screws for easy assembly.
5. Attach the spout extender.
24