Manual Grinding - acaia AOT004 User Manual

Manual Grinding

Orbit's manual grinding mode enables you to control the RPM freely in real time. During a
single grinding session, you can change the speed of the grinder by simply dragging the
RPM slider in the Orbit App. You can see the real time RPM graphed in the chart on the
App main page.
The Orbit will display a Magenta light when in manual mode. Please note that RPM
profiling is not enabled in manual mode.
Connect to Orbit
1
through the Orbit App
and choose Preset M
(Manual Mode.)
The RPM slider will
2
turn active when
switched to Manual
Mode.
Drag the RPM slider
3
to change the speed
of the grinder. The
real time RPM will be
reflected through the
gray line in the graph
below.
16