Installing System Memory - Sony VAIO PCV-J150 Reference Manual

34
VAIO® Reference Manual
5
Grasp one edge of the memory module and lift out. Store the module
in a static-free bag.
!
Touch any exposed metal part of the chassis to discharge static
electricity in your body before handling the memory module.
6
To install system memory, see
page 36.
7
Replace the power supply by sliding it down the rails on each side of
the chassis opening until the metal tab on the power supply slips into
the slot in the CD-RW drive.
8
Replace the side panel (see
9
Reconnect the power cord and turn on the computer.
Your computer automatically recognizes any change in memory and will
configure itself accordingly when you turn on the computer. No further
action is required.

"Installing System Memory"

Ta b fits into slot in C D-RW d rive
"Replacing the Side Panel"
on
AUR002.VSD
on page 25).