Storage, Transport And Installation Of The Device - Teka FilterCube 4-IFA Operating Instructions Manual

4. Storage, transport and installation of the device

WARNING
Risk of injury from tilting or unmounted components when stored or transported.
The device must be secured against tilting and slipping when it is stored or transported. Do
not stand under or next to the floating load. Lift trucks, forklift trucks and transport cranes
must have a sufficient minimum load bearing capacity.
Dangers arising from titling or functional impairments at its destination.
The unit may only be set up on a suitable surface. The unit may only be set up on a suitable
surface. The surface must be vibration-free and horizontal. The operator must check the
bearing capacity of the surface. The unit must be secured on the surface, for example using
lag bolts or stud bolts.
NOTICE
Damage or functional impairment of the unit due to climatic influences.
The unit must be stored in a dry place and protected against moisture during transport. As a
matter of principle, the filter unit is not designed to be installed outdoors. In this case contact
the manufacturer in order to find out if a caping or a trace heating system are necessary.
● First the filter unit as delivered must be transported to its destination. There the filter unit must
be moved to an upright position. Therefore, lift the filter unit with lifting tools:
Unit type 1 (with sound insulation housing): Use the 4 lifting rings (A).
Unit type 2 (without sound insulation housing): Use the 4 lifting rings (B) at the fan housing.
Unit type 3 (with fan attached alongside): Use the lifting rings (C) for the filter unit. You can
move the fan by lifting it with fork lift forks underneath the bottom (D) of the fan.
minimum load-carrying capacity of 1000 kg. The filter unit must be secured against tilting
and slipping when it is moved, lifted or put down. No one is allowed to stand under or
beside the load. Use only appropriate ladder tools.
● For setting up the filter unit at its precise designated position, you can use the methods
mentioned for each unit type. When the mentioned method is used, it may only be transported a
short distance. The filter unit must be set up and fixed on a suitable surface.
BA_FilterCube_4_IFA_20230808_EN
Use appropriate lifting tools (forklift truck, transport crane,...) with a
7 08.08.2023