Siemens CT9 Series Instructions For Use Manual page 57

Sounds
Beverage setting
Appliance settings
Personalisation
Factory settings
Mode
Appliance information Beverage counter
1
Depending on the appliance specifications
Adjustment
Button tone
Volume
Welcome tune
Signal tone
Brewing temperature
Milk sequence
Latte macchiato
pause
Automatic switch-off
Water hardness
Illumination brightness Adjust brightness of the illu-
1
Milk container
Start category
Factory settings
Mode for demo pur-
poses
Cleaning information
Version information
Network information
Basic settings en
Set the horizontal and ver-
¡
tical alignment of the dis-
play.
Adjust the optimisation and
¡
centring of the display to
the viewing angle.
Switch sound off and on.
Adjust volume in steps.
Switch sound off and on when
the appliance is started.
Switch sound off and on.
Set the brewing temperature.
Select the sequence for milk
and coffee.
Select the pause between
milk and coffee.
Set the time after which the
appliance switches off.
Set the water hardness.
mination in steps.
Set milk carton or individual
milk container.
Note: If you use the standard
milk container, the appliance
automatically detects it.
Set the menu display after
switching on, e.g. "Classic".
Reset appliance to factory set-
tings.
Switch "Demo mode" on or
off.
Display the number of bever-
ages dispensed.
Time until the water filter
should next be changed or a
service programme started.
Display appliance information.
Display network information.
57