Advertisement
Contents
Connections
o Operations accessible through the option
menu
"Tuning in by entering the frequency (Direct Tune)" (v p. 83)
0
"Changing the tune mode (Tune Mode)" (v p. 84)
0
"Tuning in to stations and presetting them automatically (Auto Preset
0
Memory)" (v p. 84)
"Presetting the current broadcast station (Preset
0
Memory)" (v p. 85)
"Specify a name for the preset broadcast station (Preset
0
Name)" (v p. 86)
"Skipping preset broadcast stations (Preset Skip)" (v p. 87)
0
"Adjusting the audibility of dialog and vocals (Dialog
0
Enhancer)" (v p. 110)
"Adjusting the volume of each channel to match the input source
0
(Channel Level Adjust)" (v p. 111)
"Adjusting the tone (Tone)" (v p. 112)
0
"Adjusting audio delay (Audio Delay)" (v p. 113)
0
"Displaying your desired video during audio playback (Video
0
Select)" (v p. 114)
"Playing the same music in all zones (All Zone Stereo)" (v p. 115)
0
"Changing the speaker settings to match the listening environment
0
(Speaker Preset)" (v p. 116)
Front panel
Display
Playback
Settings
Tuning in by entering the frequency
(Direct Tune)
You can enter the receiving frequency directly to tune in.
1
Press OPTION when the input source is "Tuner".
The option menu screen is displayed.
2
Use cursor Up/Down to select "Direct Tune", then
press ENTER.
The screen that lets you enter the frequency is displayed.
3
Use cursor Up/Down to select a number, then press
cursor Right.
4
Repeat step 3 and enter the frequency of the radio
station you want to hear.
5
When setting is completed, press ENTER.
The preset frequency is tuned in.
83
Rear panel
Tips
If cursor Left is pressed, the immediately preceding input is
0
cancelled.
Remote
Index
Appendix
Advertisement
