Advertisement
Contents
Connections
Advanced
The following advanced speaker settings are available.
o Low Frequency Effects
"Subwoofer Output" (v p. 196)
0
"Low Pass Filter" (v p. 197)
0
o Front Speaker (v p. 198)
Front panel
Display
Playback
Settings
Subwoofer Output
Selects which low frequency signals are sent to the subwoofer outputs.
o Subwoofer Output
LFE
(Default):
LFE + Main:
o Bass Extraction LPF
Selects the low-pass filter point for the full-range speaker to copy the
low frequency signal to subwoofer.
40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz /
180 Hz / 200 Hz / 250 Hz (Default: 80 Hz)
196
Rear panel
Tips
The subwoofer outputs receive the LFE
track, plus any redirected bass from
speakers with crossovers set. Use this
setting as the default for home theater
bass management in a typical room.
The subwoofer outputs receive the LFE
track, plus redirected bass, and a copy of
the low frequency signals from all full-
range speakers.
Remote
Index
Appendix
Advertisement
