Advertisement
Contents
Connections
Manual Setup
Perform when setting the speakers manually or when changing settings
made in Audyssey
®
Setup.
If you enable new speakers in the Speaker Layout menu after
0
performing Audyssey
®
Setup, you will no longer be able to select
Audyssey MultEQ
®
XT, Audyssey Dynamic EQ
Volume
®
. (v p. 162)
Changing the following settings:
0
Distances / Levels / Crossovers settings will not disable Audyssey
require running Audyssey
®
Setup again.
"Manual Setup" can be used without changing the settings. Please set if
0
necessary.
Front panel
Display
Playback
Speaker Layout
Select a suitable speaker layout for your speaker system.
o Amp Assign
®
or Audyssey Dynamic
®
or
189
Rear panel
Settings
Tips
Select the power amplifier usage method to match your speaker
system.
You need to configure the detailed settings for the speaker
configuration in accordance with the selected mode. Select Amp
Assign configure the corresponding detailed settings.
Settings to assign all power amplifier within
7.1ch:
this unit to MAIN ZONE to play back up to
7.1-channels.
Setting to assign the unit's built-in power
5.1ch + ZONE2
amplifier for ZONE2 and output the audio in
(Default):
stereo.
Setting to use the front speakers via the bi-
5.1ch (Bi-Amp):
amp connection.
Setting for playback using a second front
speaker. You can switch the playback
between front speaker A and B according
5.1ch + Front B:
to your liking. Switch the front speaker
using "Front Speaker" in the menu.
(v p. 198)
Remote
Appendix
Index
Advertisement
