Advertisement
Contents
Connections
6
When the following screen is displayed, select "Begin
Test" and then press ENTER.
Start the measurement of the first position.
Audyssey Setup
Select "Begin Test" to start the calibration.
NOTE: You will hear a series of loud chirps starting and
stopping during the tests.
Do not stand or place any objects between the speakers
and microphone while the measurements are being
made.
Back
Measurement requires several minutes.
0
NOTE
0 If "ERROR" or "CAUTION" is displayed on TV screen:
0 Go to "Error messages" (v p. 187). Check any related items, and
perform the necessary procedures.
Front panel
Display
Playback
1
Begin Test
183
Rear panel
Settings
7
When the detected speaker is displayed, select "Next"
and then press ENTER.
Audyssey Setup
Speaker Detection
Front
Yes
Center
Yes
Subwoofer
Yes
Surround
Yes
Surround Back
No
Repeat Last Test
Remote
Tips
Appendix
Next
Index
Advertisement
