Advertisement
Contents
Connections
0 "Subwoofer Output" can be set when "Speaker Layout" - "Subwoofer" in the
menu is set to other than "No". (v p. 191)
0 Play music or a movie source and select the mode offering the strongest bass.
0 If "Crossovers" - "Front" and "Center" are set to "Full Range", and "Subwoofer
Output" is set to "LFE", no sound may be output from the subwoofers,
depending on the input signal or selected sound mode. (v p. 195)
Select "LFE + Main" if you want the bass signals to always be produced from
the subwoofer.
0 "Bass Extraction LPF" can only be set for channels with "Crossovers" set to
"Full Range".
Front panel
Display
Playback
Settings
Low Pass Filter
Selects the crossover point for the LFE channel. Set this when you want to
change the playback LFE signal of the subwoofer.
o Low Pass Filter
80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / 180 Hz /
200 Hz / 250 Hz (Default: 120 Hz)
197
Rear panel
Tips
Remote
Index
Appendix
Advertisement
