Advertisement
Contents
Connections
o Height
Height speakers can be used with the Surround Back terminal.
n Configuration
Set the speaker layout when installing 1 set (2-channels) of Height,
Ceiling or Dolby Atmos Enabled speakers.
The layouts that can be selected differ depending on the combinations
of "Amp Assign" and floor speaker settings in the menu. ("Amp
Assign" (v p. 189), "Front/Center/Surround/Surround
Back" (v p. 190))
[2-channel height speakers]
Height
No
Front Height
Top Front
Top Middle
Front Dolby
Surround Dolby z
z This can be selected when using Surround speakers. Set "Surround" in the menu
to "Yes". (v p. 190)
Front panel
Display
Playback
AUDIO OUT connector
–
Surround Back
191
Rear panel
Settings
o Subwoofer
Set the presence of a subwoofer.
Yes
(Default):
No:
o Bi-Amp
When "Amp Assign" is "5.1ch (Bi-Amp)", the speaker terminal used for
the bi-amp connection of the front speakers is displayed. The terminal
is fixed to "SURROUND BACK".
SURROUND BACK:
Remote
Tips
Appendix
Use a subwoofer.
Select when a subwoofer is not
connected.
The SURROUND BACK speaker
terminal is used for the bi-amp
connection of the front speakers.
Index
Advertisement
