Input Mapping
Control Web Pages,
Use this screen to assign input numbers to corresponding actual
inputs for a specific display type and model. The inputs initially
default in the same order they are displayed on the Main control
page in the Input Selection section.
The following image displays an example of the Input Mapping
screen:
To change the input number of an actual input, perform the
following steps:
1.
In the drop-down list corresponding to the actual input you
want to change, select the new input number.
2.
Click the Submit button. The changes will be saved.
Note: If you make input mapping changes and then want to revert
back to the default mapping, click the Reset button.
EBS-N200 Network Display Adapter
continued
22