Table of Contents
Advertisement
Installing VNC for Windows 9x/2000/NT/XP
Installing VNC for MAC OS X
Control Web Pages,
To install VNC for Windows, perform the following steps:
Note: When you install VNC, you must select all of the default
settings. For more detailed information regarding VNC, refer to the
VNC Web site at www.realvnc.com.
1.
Run the self-extracting executable file and follow the
instructions to install the VNC server and viewer. You do
not need to install it as a service.
2.
Start the VNC Server (Start > Programs > RealVNC >
Run VNC Server). If you installed VNC as a service, VNC
will already be running.
3.
In the system tray (bottom right corner of the screen
where the clock is located), right-click on the VNC icon
and click on Properties.
4.
In the Password field, enter password (all lower case).
5.
Click OK.
VNC server is now ready to accept incoming connections from the
EBS-N200.
To install VNC for Mac, perform the following steps:
1.
Install VNC using OSXvnc1.33.dmg
2.
Configure the VNC password to password (all lower
case) as described above in the Windows installation
section.
EBS-N200 Network Display Adapter
continued
32
Advertisement
Table of Contents
