Using The Input And Output Connectors - Sony BKM-256DD Instructions For Use Manual

Overview
The BKM-256DD DVI-D Input Adaptor is a
DVI-D signal input adaptor for Sony
professional monitors. When installed in an
optional input slot on the main unit, it provides
DVI-D input and output connectors for the
main unit and a decoder for DVI-D signal.
Notes
• There are some monitors that are not
compatible with this unit.
To check if the monitor is compatible with
this unit, refer to the instructions for use of
the monitor.
• DVI-A and DVI-I signals are not compatible
with this unit.
• DVI-D dual-link signal is not compatible
with this unit.
Function
Decoder for DVI-D signal
The BKM-256DD supports DVI-D single-link
signal, which can be decoded by connecting a
DVI-D 24-pin cable.
Cable equalizer
The BKM-256DD is equipped with an
equalizer for received signals in the DVI-D
signal receiver section.
5 V output function
The BKM-256DD supplies 5 V power from pin
14 on either IN or OUT connector to an
external device.
6
Overview / Function / Using the Input and Output Connectors
Using the Input and
Output Connectors
For information about installing the BKM-256DD
in an input option slot on the main unit, refer to
the instructions for use of the monitor.
Configuration of input/output
connectors and signals that may be
input
The configuration of the input and output
connectors, and the signals that may be input
are shown below.
1
IN
DVI-D
1 Input DVI-D signal.
2 Output DVI-D signal.
Input of DVI-D signal
You can input DVI-D signal to the connector
1. Also you can output the signal, that input to
the connector 1, from connector 2.
Note
The DC 5 V supply from the IN connector, and
DC 5 V supply and output signal from the OUT
connector are provided only when the power of
the main unit is ON. For information about DC
5 V output, refer to the instructions for use of
the monitor.
2
OUT
256DD