Maintenance And Care; Transport; Disposal Information - Flex PD 2G 18.0-EC FS55 Operating Instructions Manual

PD 2G 18.0-EC FS55
At the end of work:
10. Release the trigger switch.
11. Move the direction preselector
switch (2) to the middle position.

Maintenance and care

Cleaning
WARNING!
If metals are worked over a prolonged
period, electroconductive dust may become
deposited inside the housing.
 Clean the power tool and ventilation slots
at regular intervals. Frequency of
cleaning is dependent on the material
machined and the duration of use.
 Regularly blow out the housing interior
and motor with dry compressed air. Keep
the power tool running while doing this.
Repairs
Repairs may be carried out by an authorised
customer service centre only.
Spare parts and accessories
For other accessories, in particular cutting
accessories, please refer to the
manufacturer's catalogues.
Exploded drawings and spare-part lists can
be found on our homepage:
www.flex-tools.com

Transport

The lithium equivalent content of the batteries
contained in the scope of delivery is below the
relevant limit values. Therefore the battery as
a separate component and the power tool with
its scope of delivery are not subject to national
or international dangerous goods regulations.
If several devices containing lithium-ion
batteries are transported, these regulations
may become relevant and require special
safety measures (e.g. for the packaging).
In this case acquaint yourself with the
regulations that apply to the country of use.

Disposal information

WARNING!
Render redundant power tools unusable:
mains operated power tool by removing
–
the power cord,
battery operated power tool by removing
–
the battery.
EU countries only.
Do not dispose of electric power tools in
the household waste! In accordance with
the European Directive 2012/19/EU on
Waste Electrical and Electronic Equipment
and its incorporation into national law, used
power tools must be collected separately
and recycled in an environmentally friendly
manner.
Raw material recovery instead of
waste disposal.
Device, accessories and packaging should
be recycled in an environmentally friendly
manner. Plastic parts are identified for
recycling according to material type.
WARNING!
Do not throw batteries into the household
waste, fire or water. Do not open disused
batteries.
Accumulators/batteries should be collected,
recycled or disposed of in an environmentally
friendly manner.
EU countries only.
In accordance with the European Directive
2006/66/EC on Waste Electrical and
Electronic Equipment and its incorporation
into national law, defective or used batteries
must be collected separately and recycled
in an environmentally friendly manner.
NOTE
Please ask your dealer about disposal
options.
21