Installation - Lincoln Electric SF4200 Operator's Manual

SF4200 STATIONARY FAN

INSTALLATION

For information on installation of fume
extraction arm(s) and filtration unit, refer to the
corresponding manuals.
ATTENTION
Use adequate mounting hardware for
installing the SF4200, corresponding with the
type of wall. Be aware, the weight of the unit
when unpacked is approx. 119 lbs (54 kg).
NOTE: In the standard configuration of the Statiflex 200-M(/HE)
Single Arm system, the filter unit is positioned on the right side of
the fan. However, it may be mounted on either side, as long as the
connection hose reaches from the outlet of the fan to the inlet of
the Statiflex 200-M(/HE).
WARNING
The installer is responsible for following Federal, State and
Local safety codes and regulations.
Before drilling, verify locations of existing gas, water, or
electrical conduits.
ELECTRIC SHOCK can kill.
• Do not touch electrically live parts such as
internal wiring.
• Turn the input power off at the fuse box
before working on this equipment.
• Have a qualified person install and service this
equipment.
MOVING PARTS can injure.
• Do not operate with covers open or filter
removed.
• Keep away from moving parts.
Only qualified personnel should install, use or
service this equipment.
2
INSTALLATION