Installation - Lincoln Electric PRISM 4200 Operator's Manual

PRISM® 4200 STATIONARY FAN

INSTALLATION

For information on installation of fume
extraction arm(s) and ltration unit, refer to
the corresponding manuals.
ATTENTION
Use adequate mounting hardware for
installing the Prism 4200, corresponding with
the type of wall. Be aware, the weight of the
unit when unpacked is approx. 119 lbs (54 kg).
NOTE: In the standard con guration of the Prism® Wall Mount
Single Arm system, the lter unit is positioned on the right side of
the fan. However, it may be mounted on either side, as long as the
connection hose reaches from the outlet of the fan to the inlet of
the Prism® Wall Mount.
WARNING
The installer is responsible for following Federal, State and
Local safety codes and regulations.
Before drilling, verify locations of existing gas, water, or
electrical conduits.
ELECTRIC SHOCK can kill.
• Do not touch electrically live parts such as
internal wiring.
• Turn the input power off at the fuse box
before working on this equipment.
• Have a quali ed person install and service this
equipment.
MOVING PARTS can injure.
• Do not operate with covers open or lter
removed.
• Keep away from moving parts.
Only quali ed personnel should install, use or
service this equipment.
2
INSTALLATION