Sony RMT-811 Service Manual page 54

Shooting with manual adjustment
Adjusting the shutter speed
(1) Set the AUTO LOCK selector to the center (auto lock release) position while
(2) If the PROGRAM AE indicator is lit, press PROGRAM AE repeatedly until the
(3) Press SHUTTER SPEED. The shutter speed indicator appears on the LCD
(4) Turn the SEL/PUSH EXEC dial to select the desired speed. The available
AUTO
1
LOCK
HOLD
To return to automatic shutter speed mode
Set the AUTO LOCK selector to AUTO LOCK or press SHUTTER SPEED. The shutter
speed indicator disappears from the LCD or viewfinder screen.
When shooting at slow shutter speed
At slow shutter speed, automatic focus may be lost. Use a tripod and adjust the focus
manually.
When shooting under fluorescent light or light bulbs
When shooting under fluorescent light or light bulbs, a rare phenomenon may happen
in which the screen lights up brightly depending on the shutter speed (Flicker
phenomenon).
If you set the shutter speed value to 1/30 or smaller
You cannot use the spot light (p. 24) and digital effect (p. 41) functions.
46
the camcorder is in standby, recording, or memory mode.
indicator disappears from the LCD or viewfinder screen.
screen or in the viewfinder.
shutter speed ranges from 1/4 to 1/10000. As you turn the dial, the shutter
speed changes as follows:
1/4 y 1/8 y 1/15 y 1/30 y ... y 1/4000 y 1/6000 y 1/10000
To increase the shutter speed, select a smaller setting (large value indicator on
the LCD screen or in the viewfinder).
2
PROGRAM
AE
3
SHUTTER
SPEED
60
4