Sony RMT-811 Service Manual page 98

Recording video or TV programs
If your VCR is a monaural type
Connect the yellow plug of the A/V connecting cable to the video output jack and the
white plug to the audio output jack on the VCR or the TV. The red plugs are not used.
Connect using an S video cable (optional) to obtain high-quality pictures
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (optional) to the S video jacks of both your camcorder and the
VCR.
This connection produces higher quality DV format pictures.
If you do various playbacks on the VCR during recording
The recorded picture may be blurred.
On the commander mode
Your camcorder works in the commander mode, VTR 2. Commander modes 1, 2 and 3
are used to distinguish your camcorder from other Sony VCRs to avoid remote control
misoperation. If you use another Sony VCR in the commander mode VTR 2, we
recommend changing the commander mode or covering the sensor of the VCR with
black paper.
On index signal
The index is automatically marked on a tape when you start recording. If you mark the
index using the INDEX MARK button during recording, "LINE" appears in the CH
column on the INDEX SEARCH screen, and the index is recorded on cassette memory.
90