Safety Instructions - Foster 7131 054 Instructions For Installation And Use Manual

1 - Safety Instructions

EN
IMPORTANT
The oven's data plate is accessible even with the
oven fully installed. The plate is visible simply by
opening the door. Always quote the details from
it to identify the appliance when ordering spare
parts.
• Do not disassemble any parts prior to having
disconnected the oven from the mains.
• Do not use the appliance if any part is broken (for
example a glass). Disconnect it from the mains and
call service.
• Before using the oven, it is recommended to make it
operate at noload at the maximum temperature for
an hour to eliminate the insulating material odour.
• In all models, leave the door closed when the grill is
used.
• The cooling fan may remain in operation so long as
the oven is hot, even after it has been switched off.
• During the use the appliance becomes very hot; don't
touch the heating elements inside the oven.
• Parents and adults should pay particular attention
when using the product in presence of children.
2
• Children should be overseen so as to ensure that they
don't play with the equipment.
• Keep children under age 8 away, unless constantly
supervised.
• This appliance is not intended for use by persons
(including children over age 8) with reduced
physical sensory or mental capabilities, or lack of
experience and knowledge, unless they have been
given supervision or instruction concerning use of the
appliance by a person responsable for their safety.
• Children may not perform cleaning and maintenance
unsupervised.
• In order to avoid damage to the oven enamel coat,
do not cover the oven muffle sole with any item (e.g.
aluminum foil, pans and the likes).
• Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass since they can
scratch the surface, which may result in shattering of
the glass.
• Abrasive detergents and steam cleaning equipment
should not be used for cleaning.
• The appliance must not be installedbehind a
decorative door in order to avoid overheating.
• WARNING: Ensure that the appliance is switched off
before replacing the lamp to avoid the possibility of
electric shock.
• The oven is cool and power to the oven has been
turned off before removing the door. Failure to do so
could result in electrical shock or burns.
• Use only the meat probe supplied with the appliance.
IMPORTANT
If the oven is installed in an ambient temperature
below 37 °F (3 °C), F*0117 may appear; when
a higher ambient temperature is reached, the error
will no longer appear.