Assembly - Craftsman 316.794991 Operator's Manual

ATTACH FLEX TUBE
Put the hose clamp(C) on the flex tube before connect-
ing the flex tube and the fan's outlet tube together.
Connect the flex tube (B) to the fan's outlet tube (A) (Fig.
1) with a hose clamp (C) (Fig. 2) and tighten securely
(Fig. 2).
A
C
ATTACH OPERATING TUBE
NOTE: keep the throttle cable as straight as possible
when connecting the blower tubes.
1. Place the unit on flat surface during assembly. Insure
screw mechanism of clamp is positioned away from
operator.
2. Put the hose clamp(C) on the flex tube and the oper-
ating tube together.
3. Turn the rotary ring mark(D) so it aligns with the throt-
tle handle (F). Insert the operating tube (E) into the
flex tube (B) (Fig. 3) and then tighten securely with a
hose clamp (G)(Fig. 4).
4. Attached throttle linkage clips (# 24-know your blow-
er) - to both ends of the flex tube to secure the throt-
tle cable. ( See Fig. 5 and Fig. 6)
ASSEMBLY INSTRUCTIONS
Fig. 1
Fig. 2
B
9
D
B
F
180˚
Fig. 3
G
Fig. 4
THROTTLE LINKAGE CLIPS
Fig. 5
THROTTLE LINKAGE
CLIPS
Fig. 6
E