ESAB Rustler EM 201C Instruction Manual page 19

5 OPERATION
Figure A. Figure B.
To check that the feed pressure is set correctly, you can feed out the wire against an insulated object,
e.g. a piece of wood.
When you hold the welding torch approx. 5 mm from the piece of wood (figure A) the feed rollers
should slip.
If you hold the welding torch approx. 50 mm from the piece of wood, the wire should be fed out and
bend (figure B).
0463 933 001 - 19 - © ESAB AB 2023