Follett L60418 User Manual page 3

2 ft. x 1" OD
silicone tubing
(6,4 mm per 0,3 m)
Chassis drain plumbing
§ Plug must be removed from John Guest fitting.
§ Route 3/8" drain tubing through knockout in back of docking station and insert fully into John Guest fitting
connection at the rear of the machine chassis. Route other end of 3/8" drain tubing to drain.
§ Drain must slope 1/4" inch per foot (6 mm per 30.4 cm).
Horizon Elite 1010/1410 Ice Machines (Remote Condensing)
3/4" barb x 3/4" FPT
3/4" MPT x 1" slip
1/4" per foot
1'
1" PVC Drain
Minimum 8"
radius
2 ft. x 1" OD
silicone tubing
3/4" barb x 3/4" FPT
3/4" MPT x 1" slip
1" Stand pipe/Drain
3