Exposure Mode; Zoom Mode; Focus Mode; White Balance Mode - Sony IPELA SNC-Z20N User Manual

The trimming portion is determined as shown
below:
Point rotated by 180° around the
axis of the center of the still image
Red trimming Center of the
frame still image
To change the trimming portion, click on another
point on the image.
When Random is selected:
Click the left button of the mouse on the still image
and drag it diagonally. The red frame that appears
as you drag indicates the trimming portion.
5
Click OK at the bottom of the window.
The trimmed image is displayed on the main viewer
page.
6
To close the image, click
corner.

Zoom mode

Select the zoom mode.
Select Full to operate the optical zoom of × 18 and the
electronic zoom of × 12, giving × 216 in total. The
electronic zoom will operate after the optical zoom.
Select Optical only to operate the optical zoom of × 18
only. In this case, you can use an electronic zoom of × 2
by clicking the DZOOM × 2 button on the main viewer
page. To cancel the electronic zoom, click the DZOOM
× 1 button. (See "Zooming" on page 10.)

Focus mode

Select the focus mode.
Select Auto to adjust the focus automatically.
Select Manual to adjust the focus manually using the
NEAR and FAR buttons on the main viewer page. If you
click the ONE PUSH AF button, the focus is adjusted
instantly. (See "Focusing" on page 10.)

White balance mode

Select the white balance mode.
You can select from among Auto, Indoor, Outdoor,
One push WB, ATW and Manual.
Still image
Clicked point
on the upper-right
If you select One push WB, the ONE PUSH
TRIGGER button is displayed. Click the button to
adjust the white balance instantly.
If you select Manual, the R Gain and B Gain controls
are displayed. Set 0 to 255 for each control.

Exposure mode

Select the exposure from among Full auto, Shutter
priority, Iris priority and Manual.
The setting items required for each setting appear.
Full auto: Adjusts the exposure automatically using the
electronic shutter, iris and gain. Select the Back light
compensation menu On or Off.
Shutter priority: Adjusts the exposure automatically
using the iris and gain. Select the electronic shutter
speed from the Shutter drop-down list.
Iris priority: Adjusts the exposure automatically using
the electronic shutter and gain. For the iris
adjustment, select the F number from the Iris drop-
down list.
Manual: Select the electronic shutter, iris and gain from
the drop-down list for each control.
Back light compensation
Select On to activate the backlight compensation, or Off
to deactivate it.
Shutter
Select the electronic shutter speed from among the
following:
SNC-Z20N:
1/10000, 1/6000, 1/4000, 1/3000, 1/2000, 1/1500,
1/1000, 1/725, 1/500, 1/350, 1/250, 1/180, 1/125, 1/100,
1/90, 1/60, 1/30, 1/15, 1/8, 1/4, 1/2, 1 (seconds).
SNC-Z20P:
1/10000, 1/6000, 1/3500, 1/3000, 1/2500, 1/1750,
1/1250, 1/1000, 1/600, 1/420, 1/300, 1/215, 1/150,
1/120, 1/100, 1/75, 1/50, 1/25, 1/12, 1/6, 1/3, 1/2,
1 (seconds).
Iris
Select the iris (F number) from among the following:
F1.4, F1.6, F2, F2.4, F2.8, F3.4, F4.0, F4.8, F5.6, F5.8,
F8.0, F9.6, F11, F14, F16, F19, F22, Close.
Gain
Select the gain (dB) from among the following:
-3 dB, 0 dB, 2 dB, 4 dB, 6 dB, 8 dB, 10 dB, 12 dB, 14
dB, 16 dB, 18 dB, 20 dB, 22 dB, 24 dB, 26 dB, 28 dB
Setting the Camera — Camera setting Page
19