Picture Tab; Audio Upload; Exposure Mode; Backlight Compensation - Sony Ipela SNC-RZ50N User Manual

Notes
• If the bit rate is set to other than G.711(64kbps), no
audio is output when you use the Java applet viewer.
• When MPEG4 is selected for Codec in the Alarm
buffer menu, no audio is output when you use Java
applet viewer.

Audio upload

Using the SNC audio upload tool stored in the supplied
CD-ROM, you can output the audio that is input to the
computer's audio input terminal from the speaker
connected to the line output jack of the camera.
Select Enable to output the audio from the speaker.
Reset camera menu
Click Reset, and the message "Camera menu setting is
reset to default. Are you sure?" is displayed. To reset to
default, click OK.
OK/Cancel
See "Buttons common to every menu" on page 30.

Picture Tab

You can set the color condition, exposure, etc. of the
camera.
White balance
Select the white balance mode.
Auto: Automatically adjusts the color to be closest to
the image you are viewing. (approximately 3000 K
to 7500 K)
Indoor: Adjusts the white balance for shooting indoors
under an incandescent lamp. (about 3200 K)
Outdoor: Adjusts the white balance for shooting
outdoors. (about 5800 K)
One push WB: The One push trigger button becomes
active. Click the button to adjust the white balance
instantly.
ATW: Makes the subject lighter and automatically
adjusts to re-create the original color. (approximately
2000 K to 10000 K)
Manual: When this option is selected, R gain and B
gain become active.
Selectable gain values are from 0 to 255.

Exposure mode

Select the exposure mode of the camera.
The setting items required for the selected mode become
active.
Full auto: The camera performs the gain adjustment
and iris adjustment automatically. In this case, the
shutter speed is fixed. (1/60 sec. for NTSC or 1/50
sec. for PAL).
When this option is selected, Slow shutter and
Backlight compensation become active.
Shutter priority: The camera performs the gain
adjustment and iris adjustment automatically and
you can select the shutter speed. When this option is
selected, Shutter speed becomes active.
Iris priority: The camera performs the gain adjustment
and shutter speed adjustment automatically, and you
can select the iris. When this option is selected, Iris
becomes active.
Manual: You can set the exposure manually. When this
option is selected, Shutter speed, Iris and Gain
become active.
Set the following items as required, according to the
selected exposure mode.

Backlight compensation

You can set On or Off for backlight compensation.
When you select On, the backlight compensation
function starts to work.

Exposure compensation

The exposure compensation function adjusts the
brightness for AE. When you select On, you can select
the exposure compensation values.
Selectable values are as follows:
-10.5, -9, -7.5, -6, -4.5, -3, -1.5, 0, +1.5, +3, +4.5, +6,
+7.5, +9, +10.5 (dB)
Slow shutter
Set the slow shutter. When On is selected, the auto
exposure setting including the long time exposure is set
to adjust to the brightness of the scene.
Setting the Camera Image and Audio — Camera Menu
37