Sony IPELA SNC-Z20N User Manual page 54

Configuring Windows Firewall
The IP Setup Program may not operate correctly
depending on the configuration of Windows Firewall.
(No cameras are shown in the list even if they are
detected.) In this case, confirm the Windows Firewall
configuration as follows:
Example: In case of IP Setup Program
1
Select Control Panel from the Start menu of
Windows.
2
Click Windows Firewall.
3
Select Turn Windows Firewall on or off.
"User Account Control – Windows needs your
permission to continue" may appear. In this case,
click Continue.
4
Select Off in the "General" tab.
The cameras will be displayed in the list.
If you want to keep Windows Firewall On, continue
with the following steps.
54
When using Windows Vista
5
Select the "Exceptions" tab.
6
Select Add Program....
7
If the Add Program dialog appears, select IP Setup
Program and click OK.
Then the IP Setup Program is added to the Program
or port list.
8
Click OK.