Last Number Redial; Push-To-Talk; Speed Dial 100 - Polycom IP 550 User Manual

Last Number Redial

Allow the user to redial the last number dialed with a feature code or a button.
Using the Feature
1. Press the
REDIAL
Extended Functionality
1. GO OFF HOOK
2. Press *66.

Push-to-Talk

Provides intercom-like functionality. This feature allows a user to dial another station where the system will request
the destination station to automatically answer. For this feature to work (called station automatically answers via the
speakerphone), the called station must support an enhanced calling protocol. The calling station must also be in the
called party's Push-to-Talk allowed access list.
Using the Feature
Activate: Using the Feature Code
1. Pick up HANDSET, press the
2. Dial *50. You will hear a stuttered dial tone then a normal dial tone.
3. Dial the extension of the phone you want to intercom.
Extended Functionality
Program a Speed Dial 8 number to quickly place an intercom call.

Speed Dial 100

Allow a user to use a feature code and 2 digits to complete a call.
Using the Feature
Configure
1.
GO OFF HOOK.
2. Press *75. You will hear a stuttered dial tone then a normal dial tone.
3. Using the
KEYPAD
with it and then press the
4. The will notify you whether or not the programming was successful.
IVR
Use
1. GO OFF HOOK.
2. Press
#
3. Press the Speed Dial 100 Codes 00-99.
Zayo Managed Services
All manuals and user guides at all-guides.com
Feature Key.
NEWCALL
Enter the Speed Dial 100 Code
# key.
IP 550 User Guide
soft key, or press the
SPEAKERPHONE
plus the
00-99 NUMBER
Polycom IP 550 User Guide
KEY.
you want to associate
Page 12 of 13