PROAIM Quad-4 Pro Assembly Manual page 2

Doorway Dolly Setup

Firstly, insert 4 Pneumatic Wheels to wheel
rod of the Dolly. Tighten nuts properly with
help of provided tool to secure it.
NOTE: By correctly using Steering Push/Pull
Bars, it is possible to maneuver Quad Dolly with
extreme precision.

Position single Steering
centrally on the steering rod mount located
on rear axle of dolly. Connect them properly
by locking with provided knob.

Position dual Steering Push/Pull Bar on the
steering rod mount located on rear axle of
dolly. Connect them properly by locking with
provided knob.
NOTE: You can use both the Steering Bars
together for heavier setups.
Chair Setup

To mount the Chair, you need to connect Z-
Bracket onto dolly base.
Push/Pull Bar
2