Other Information Troubleshooting - Sony FD Trinitron WEGA KV-27FS120 Operating Instructions Manual

Sony wega kv-27fs120: user guide
Hide thumbs Also See for FD Trinitron WEGA KV-27FS120:
Table of Contents

Advertisement

Other Information
Troubleshooting
If you have a problem with your TV, try the suggestions below. If the problem persists, see
"Contacting Sony" at the end of this section.
General
Problem
I want to reset the TV
to the factory
settings
The TV is dirty
I lost the parental
control password
There is a black box
on the screen
There was a blackout
or power outage, and
now the TV won't turn
on and the timer LED
is flashing
Digital cable box
does not work
Possible Remedies
Turn on the TV. While holding down
press POWER button on the TV front panel. The TV will turn
itself off, then back on again. Release
Clean the TV with a soft dry cloth. Never use strong solvents
such as thinner or benzine, which might damage the finish of
the cabinet.
In the password screen, enter the following master password:
4357. After using the master password, you must create a new
password. You cannot use the master to unlock currently
blocked channels.
You have selected a text option in the Setup menu (page 40) and
no text is available. To turn off this feature, select Off in the
Caption Vision option. If you were trying to select closed
captioning, select CC1-4 instead of Text1-4.
Press the POWER button on your remote control or on the TV
front panel.
Be sure that you have not connected the digital cable box to the
TV's TO CONVERTER jack. This jack is not compatible with
digital cable boxes.
If you are connecting a VCR and digital cable box using a
splitter, as described in page 14, you must use a special bi-
directional splitter (5~900MHz minimum) that is designed to
work with your digital cable box.
on the remote control,
.
41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents