Connecting a TV, VCR, Cable/Antenna, and Satellite Receiver
using Composite Video (VIDEO/AUDIO L(MONO), R)
From
cable or
antenna
Satellite antenna
cable
1
Satellite receiver
VIDEO 1
VIDEO 2
VIDEO 1
VIDEO 2
Y
P
B
L
L
P
R
R
R
6
For Viewing
1
Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2
Connect the single input jack of the splitter (not supplied) to your incoming cable/antenna
(optional connection to view local channels or broadcast).
3
Using coaxial cables (not supplied), connect the two output jacks of the splitter
(not supplied) to:
a) the IN jack on your satellite receiver
b) the VHF/UHF jack on the TV
4
Using a coaxial cable (not supplied), connect the OUT jack on your satellite receiver to the
VHF/UHF IN on your VCR.
5
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to
the AUDIO/VIDEO IN on your TV.
6
Using audio/video cables (not supplied), connect the AUDIO/VIDEO OUT on your
satellite receiver to the AUDIO/VIDEO IN on your TV.
Using your TV with this connection
This connection allows you to do the following:
❏
Program your Sony remote control to operate your VCR or satellite receiver (see page 5).
❏
To activate your remote, press
(FUNCTION button) to operate your satellite receiver.
❏
Press
repeatedly to switch between VCR input (VIDEO input), VHF/UHF
(local channels or unscrambled), or your cable box (cable system or scrambled channels).
2
Optional
Splitter
3a
3b
For Viewing
4
For Recording
LINE
IN
VIDEO
AUDIO L AUDIO R
VCR
LINE
OUT
5
(FUNCTION button) to operate your VCR or
Rear of TV
3
1
4
Y
S VIDEO
P
B
P
R
VIDEO
L
(MONO)
R
For Playback
AUDIO OUT
(VAR/FIX)
L
L
(MONO)
R
R
Video (yellow)
Audio L (white)
Audio R (red)
17