Table of Contents
Advertisement
Note: Use Infra-Red Pass filter to cover the lens during focusing to
10 en |
simulate low light conditions on scene for correct 24-hour focusing.
For camera with manual iris lens, the camera should be focused with
2.) Attach the faceplate to the camera housing. Insert and tighten the
i
the lens iris fully opened to simulate the worst possible depth of field.
6 bolts.
Using a Infra-Red Pass filter will ensure the iris is fully open for
3.) Power-up the camera and check its operation.
correct setup and adjustment.
Note that statement above is applicable only for Day/Night or IR
version cameras.
2.6
Camera re-assembly
Make sure all wires are properly connected, all holes are sealed
against moisture penetration, and all mounting screws are tight.
1.) Slide the lens foam over the camera lens. Make sure the foam is
snug and as close to the faceplate viewing window as possible
and the photocell is secure with an unobstructed view.
2.) Attach the faceplate to the camera housing. Insert and tighten the
6 bolts.
3.) Power-up the camera and check its operation.
MAN36IPB Rev.0 | 2008.10
Quick Install
Get other manuals https://www.bkmanuals.com
EX36-IP
Bosch Security Systems
Advertisement
Table of Contents
