Clock; Setting The Time Manually; Syncing The Time With Gps; Setting An Alarm - Garmin SWIM 2 Owner's Manual

Clock

Setting the Time Manually

1 From the watch face, hold UP.
2 Select > System > Time > Set Time > Manual.
3 Select Time, and enter the time of day.

Syncing the Time with GPS

Each time you turn on the device and acquire satellites, the device automatically detects your time zones and
the current time of day. You can also manually sync the time with GPS when you change time zones, and to
update for daylight saving time.
1 From the watch face, hold UP.
2 Select > System > Time > Sync with GPS.
3 Wait while the device locates satellites

Setting an Alarm

You can set multiple alarms. You can set each alarm to sound once or to repeat regularly.
1 From the watch face, hold UP.
2 Select Alarm Clock > Add Alarm.
3 Select Time, and enter the alarm time.
4 Select Repeat, and select when the alarm should repeat (optional).
5 Select Sounds, and select a type of notification (optional).
6 Select Backlight > On to turn on the backlight with the alarm.
7 Select Label, and select a description for the alarm (optional).

Deleting an Alarm

1 From the watch face, hold UP.
2 Select Alarm Clock.
3 Select an alarm.
4 Select Delete.

Starting the Countdown Timer

1 From any screen, hold LIGHT.
2 Select Timer.
3 Enter the time.
4 If necessary, select Restart > On to automatically restart the timer after it expires.
5 If necessary, select Sounds, and select a type of notification.
6 Select Start Timer.
30
(Acquiring Satellite Signals, page 36).
Customizing Your Device