Advertisement
Appendix: Block Diagram
Coax Transmit Shield
Transmit (TX)
Coax
Receive (RX)
Coax Receive Shield
Although the arrows in this diagram showing data flow
are bidirectional, and the Adapters and Balun Mate II do
support bidirectional data transfer, the direction of flow
on the transmit lines (coax TX, twisted-pair pins 1 and 2)
will always be opposite to the direction of flow on the
receive lines (coax RX, twisted-pair pins 4 and 5). Which
signal is input and which is output on either interface
will usually depend on the DTE/DCE configuration of
the attached devices.
Get other manuals https://www.bkmanuals.com
APPENDIX: Block Diagram
JP1
Transmit
Shield on
RJ-45 Pin 3
Transmit (TX)
Signal
Conversion
Receive (RX)
Receive Shield on
RJ-45 Pin 6
JP2
Shield on
RJ-45
Jack
Twisted
Pair
19
Advertisement
