Callaway CSi PRO Manual

CSi CLUB SUGGESTION SET-UP
To set up CSi, you will first need to know your 7-iron distance in your
preferred unit of measure (yards/meters). Based on that information, the
proprietary firmware will then make club suggestions based on the distance
you measure.
SET
I
7
7I,
160
160 flashing
2. While in the "SET" interface, HOLD the POWER button for an additional
3 seconds to toggle to the club distance setting. Tapping the POWER button
will add (+) 1 yard/meter, tapping the MODE button will (-) 1 yard/meter.
SET
I
7
7I,
170
170 flashing
3. Once correct distance is set, HOLD the POWER button for 3 seconds to
confirm. Once you see both icons flashing, tap the POWER button again to
engage the "OUT" screen, then hold the POWER button an additional
3 seconds to return to the main screen.
To turn the CSi club suggestion ON/OFF, simply HOLD the Mode
Button for 3 seconds while on the main screen
1. To set your 7-iron distance, start
with the CSi laser in the OFF position.
HOLD the POWER button for 10
seconds to engage CSi set up mode.
In the initial "SET" interface screen,
"7I" and "160" icon will be flashing
out
I
7
170
CALLAWAY CSi PRO
LASER RANGEFINDER
J. Club Suggestion
FOR MORE SUPPORT VISIT:
www.CallawayDMD.com/product-support
Manual
L
W
J