Fitting The Cover - Fein RS17-70E Repair Instructions

Schleifen
Assembly

9.4.5 Fitting the cover

Steps that must be completed:
- Assembling the motor
- Positioning the gearbox housing
- Positioning the carbon brushes
- Fitting the switch
Tools:
- Torx T15
Photo shows similar product
C-SC_CSSM
1
2
Version 1.0_Vorlage 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
1. Position the cover (1).
2. Screw in the two screws (2) [1.5 Nm].
34130583060
Printed in Germany
11.07.2023 Page 59 of 70