Fitting - Fein AGSZ 18-280 BL Repair Instructions

AGSZ 18-280 BL; AGSZ 18-280 LBL; AGSZ 18-90 LBL

7. Fitting

Fitting the collar bearing (applies to: AGSZ 18-280 BL)
1
1. Press the drive shaft (1) into the grooved ball bearing.
2. Grease the sealing ring (2).
3. Insert the sealing ring (2).
4. Press the drive shaft into the collar bearing (3).
5. Insert the circlip (4) into the collar bearing.
6. Place the circlip (5) on the drive shaft.
C-SC_CSSM Version 1.0 2018-02-13 All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation
2
3
.
4
5
Tools:
- Arbor press
- Sleeve
15 mm inner diameter
31 mm outer diameter
- Circlip pliers
Page 27 of 46